Difference between revisions of "WOCE Build Environment"

From WebOS-Ports
Jump to: navigation, search
(added shared folder information.)
Line 73: Line 73:
 
  4 CPU Cores  
 
  4 CPU Cores  
 
  4Gb RAM
 
  4Gb RAM
 +
 +
===Shared Folder===
 +
 +
Also note there ''is'' a shared folder between the host and virtual machine. The folder your vagrant files are stored in is shared with the virtual machine in /srv/share. This is useful in allowing you to do dev work in the environment you are most comfortable with while still making it easy to use our build environment. Anything you want the build environment to be able to access for the build should be placed in this folder. Assuming your vagrant install is as recommended, see the following as an example.
 +
 +
'''Host System:'''
 +
~/woce-be/
 +
 +
'''''IS'''''
 +
 +
'''Virtual Machine:'''
 +
/srv/share/

Revision as of 06:08, 1 August 2012

Develop in your environment, Build in ours.

WOCE Build Environment

Introduction

The WOCE BE uses Vagrant and Virtualbox to create a self-contained build environment for use on OSX and Linux Hosts.

Our goal is to create a consistent build setup for developers so that if there are issues with builds we can know that we all are singing off the same sheet of music.

Minimum Requirements

x86 based computer running OSX(10.5 minimum) or Linux(32bit or 64bit).

Enough resources to allot:

  • 1 "Virtual CPU"
  • 1GB "Virtual RAM"
  • 20GB "Virtual HD"

Installation Procedure

1. From your development host go to Vagrant Downloads and download the latest version for your host.

2. From your development host go to Virtualbox Downloads and download the latest version for your host.

3. Install Virtualbox

4. Install Vagrant (Vagrant Getting Started Guide)

5. From a Command Prompt in the directory you have set aside for the build environment

git clone git://www.github.com/woce/woce-be

Usage

From a Command Prompt in the woce-be directory:

Bring the VM online

vagrant up

(You can ignore stdin: not a tty errors- these are normal.)

SSH into the VM

vagrant ssh

From here, there will be a woce-build directory in /vagrant/home, cloned down from git during 'vagrant up'. Also for convenience of custom builds, the directory containing the Vagrantfile on the host OS will be mounted at /srv/share inside the virtual machine.

When you're done: Shut down the VM

vagrant halt

And if you want to destroy the VM to start with a clean slate:

vagrant destroy

Extra

To maximize build performance, it is recommended to configure the Virtual Machine with as many CPU cores and as much RAM as is possible.

This can be done through the VirtualBox Settings dialogue, recommended settings are half of the host system's CPU cores, and half of it's RAM.


Example:

Host System:

8 CPU Cores 
8Gb RAM


Virtual Machine:

4 CPU Cores 
4Gb RAM

Shared Folder

Also note there is a shared folder between the host and virtual machine. The folder your vagrant files are stored in is shared with the virtual machine in /srv/share. This is useful in allowing you to do dev work in the environment you are most comfortable with while still making it easy to use our build environment. Anything you want the build environment to be able to access for the build should be placed in this folder. Assuming your vagrant install is as recommended, see the following as an example.

Host System:

~/woce-be/

IS

Virtual Machine:

/srv/share/