LunaCE on Pre3

Introduction

This page is dedicated to running the WOCE version of LunaSysMgr on a Pre3.

What Works

Touch Input

Volume Keys

Ringer Switch

Sound (plays notification noise instead of boot sound because it's missing, can't test further currently)

Status Bar

System Menu

What Sort Of Works

Virtual Keyboard

Characters are all garbled

Opens and works w/password unlock

Opens and crashes in maximized cards (lock & unlock when maximised to show keyboard button):

** (LunaSysMgr:3437): DEBUG: IME: Window got focus change in sysmgr com.palm.app.clock focused: 1, fieldtype: 0, fieldactions: 0x00
** Message: void DisplayManager::setTouchpanelMode(bool): Setting hal touchpanel mode to 1
** (LunaSysMgr:3437): DEBUG: System request to show the IME
** (LunaSysMgr:3437): DEBUG: bool SystemUiController::changeNegativeSpace(int, bool, bool): 423
** (LunaSysMgr:3441): DEBUG: WindowedWebApp::onKeyboardShown if (window.Mojo && window.Mojo.keyboardShown) {window.Mojo.keyboardShown(true);}
** (LunaSysMgr:3437): DEBUG: Allowing touch-end event through
** (LunaSysMgr:3441): DEBUG: WEBKIT PERF: PAINT appid: \xc0\xc3, time: 892404

LunaSysMgr: symbol lookup error: LunaSysMgr: undefined symbol: _ZN4Palm7WebView24unmapCompositingTexturesEv

** (LunaSysMgr:3437): CRITICAL **: virtual void WebAppMgrProxy::onDisconnected() (181): WebAppMgrProxy was Disconnected!!

** (LunaSysMgr:3437): CRITICAL **: virtual void WebAppMgrProxy::onDisconnected() (185): Exiting Sysmgr...

Power Button Screen lock/unlock works fine

Press-and-hold to turn off doesn't function (may be to do with app launching)

UI Layout

Launcher

What Doesn't Work

Quicklaunch Apps (icons glow when tapped, do nothing)

App Launching (cards will appear, but solid white with no contents)

Voice Dial (no apps)

Keyboard Input (Crash)

Screenshot with Opt+Sym+P (Crash, luna-send method works fine)

Just Type (Nothing Shows)

Gesture Area

Virtual Keyboard in Apps (Pops up looking all garbled, then crashes)

MinimalUI (First Use Mode? Just hangs at the HP logo, presumably because apps don't launch.)

Disclaimer

Before continuing, be sure to understand that this version of LunaSysMgr is NOT usable in it's current state. It is here for the purpose of further development.

Instructions

Transfer the required libraries to the Pre3

Open a Terminal and cd into woce-build/rootfs/armv7/usr/lib/

Compress the libraries into a .tar file for easy transfer (-h to follow symbolic links, otherwise libaffinity.so breaks)

tar -chvf lunaLibs.tar libQt* libhal.so libaffinity.so libqpalm.so libpsc.so

Copy the files to the device

novacom put file:///usr/lib/lunaLibs.tar < lunaLibs.tar

Extract them

novaterm
cd /usr/lib
tar -xvf lunaLibs.tar
rm lunaLibs.tar

Copy libqpalm to the Qt Libraries folder

cp ./libqpalm.so /usr/plugins/platforms

Link the new libraries

ldconfig -v

Close novaterm

exit

Transfer the required HAL modules to the Pre3

Open a Terminal and cd into woce-build/rootfs/armv7/lib/hal/modules

Compress the libraries into a .tar file for easy transfer

tar -cvf lunaHAL.tar ./*

Copy the files to the device

novacom put file:///lib/hal/modules/lunaHAL.tar < lunaHAL.tar

Extract them

novaterm
cd /lib/hal/modules/
tar -xvf lunaHAL.tar
rm lunaHAL.tar

Close novaterm

exit

Transfer the required Luna modules to the Pre3

cd into woce-build/rootfs/armv7/usr/lib/luna

Compress the libraries into a .tar file for easy transfer

tar -cvf lunaModules.tar ./*

Copy the files to the device

novacom put file:///usr/lib/luna/lunaModules.tar < lunaModules.tar

Extract them

novaterm
cd /usr/lib/luna
tar -xvf lunaModules.tar
rm lunaModules.tar

Close novaterm

exit

Transfer the required resources to the Pre3

cd into woce-build/rootfs/armv7/usr/palm/sysmgr

Compress the resources into a .tar file for easy transfer

tar -cvf lunaRes.tar ./*

Copy the files to the device

novacom put file:///usr/palm/sysmgr/lunaRes.tar < lunaRes.tar

Extract them

novaterm
cd /usr/palm/sysmgr
tar -xvf lunaRes.tar
rm lunaRes.tar

Close novaterm

exit

Prevent LunaSysMgr from crashing on startup

Option A: Clone a git repository

git clone git://github.com/ShiftyAxel/LunaSysMgr.git
git checkout lsm-pre3

And to pull down the latest changes

git pull origin lsm-pre3

Option B: Download a patch

Download and apply the following patch to your own LSM sources:

cd /path/to/LunaSysMgr
curl https://github.com/ericblade/LunaSysMgr/commit/329e500b0ae0d0a2aaede30d7ae9086f66f49034.diff > lsm-pre3.diff
patch -p1 < lsm-pre3.diff

Build and Run

Modify woce-build/support/cross-compile.mk, changing MACHINE=topaz to MACHINE=mantaray

Build LunaSysMgr, noting that the output will now be in the release-mantaray folder instead of release-topaz

Backup your old LunaSysMgr

novaterm
stop LunaSysMgr
mv /usr/bin/LunaSysMgr /usr/bin/LunaSysMgr.old
exit

Upload the new LunaSysMgr

novacom put file:///usr/bin/LunaSysMgr < /path/to/compiled/LunaSysMgr

Run the new LunaSysMgr

novaterm
LunaSysMgr