Difference between revisions of "Template:Tenderloin Install Steps"

From WebOS-Ports
Jump to: navigation, search
Line 1: Line 1:
 
==Preparing your device & installation instructions==
 
==Preparing your device & installation instructions==
  
1. Create an ext3fs lvm partition of at least 1GB (use [http://forums.webosnation.com/webos-internals/304871-tailor-device-live-partition-filesystem-editor-beta-testing.html Tailor] or [http://www.webos-internals.org/wiki/UbuntuChroot#Step_1:_Creating_a_WebOS_Doctor Meta-Doctor] to achieve this). It must be named '''ext3fs'''!
+
1. Create an ext3fs lvm partition of at least 1GB (use [http://forums.webosnation.com/webos-internals/304871-tailor-device-live-partition-filesystem-editor-beta-testing.html Tailor] or [http://www.webos-internals.org/wiki/UbuntuChroot#Step_1:_Creating_a_WebOS_Doctor Meta-Doctor] to achieve this). It must be named '''ext3fs''' ! Tailor automatically uses this name for an ext3 partition.
  
2. Download the image and extract it into the new partition by issuing the following commands:
+
2. Download the image, copy it to the USB driver (/media/internal) and extract it into the new partition by issuing the following commands:
  
 
<code>mkdir /media/ext3fs && mount /dev/store/ext3fs /media/ext3fs</code>
 
<code>mkdir /media/ext3fs && mount /dev/store/ext3fs /media/ext3fs</code>
  
<code>tar xzf rootfs.tar.gz -C /media/ext3fs</code>
+
<code>cd /media/internal</code>
 +
 
 +
<code>tar xzf webos-ports-dev-image-tenderloin.tar.gz -C /media/ext3fs</code>
  
 
3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below:
 
3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below:

Revision as of 21:17, 7 July 2014

Preparing your device & installation instructions

1. Create an ext3fs lvm partition of at least 1GB (use Tailor or Meta-Doctor to achieve this). It must be named ext3fs ! Tailor automatically uses this name for an ext3 partition.

2. Download the image, copy it to the USB driver (/media/internal) and extract it into the new partition by issuing the following commands:

mkdir /media/ext3fs && mount /dev/store/ext3fs /media/ext3fs

cd /media/internal

tar xzf webos-ports-dev-image-tenderloin.tar.gz -C /media/ext3fs

3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below:

- Boot into webOS

- Run novaterm

- mount -o remount,rw /boot

cd /boot

rm uImage

exit

novaterm put file://boot/uImage < moboot.uImage

novaterm

cd /boot

ln -sf uImage-2.6.35-palm-tenderloin uImage.webOS

Output should look like: Moboot.png