Difference between revisions of "Template:Tenderloin Install Steps"
| Line 13: | Line 13: | ||
3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below: | 3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below: | ||
| − | - Boot into webOS | + | - Boot into webOS (make sure to have Developer Mode enabled!) |
- Run novaterm | - Run novaterm | ||
<code> | <code> | ||
| − | + | mount -o remount,rw /boot | |
cd /boot | cd /boot | ||
Revision as of 05:19, 8 July 2014
Preparing your device & installation instructions
1. Create an ext3fs lvm partition of at least 1GB (use Tailor or Meta-Doctor to achieve this). It must be named ext3fs ! Tailor automatically uses this name for an ext3 partition.
2. Download the image, copy it to the USB driver (/media/internal) and extract it into the new partition by issuing the following commands:
mkdir /media/ext3fs && mount /dev/store/ext3fs /media/ext3fs
cd /media/internal
tar xzf webos-ports-dev-image-tenderloin.tar.gz -C /media/ext3fs
3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below:
- Boot into webOS (make sure to have Developer Mode enabled!)
- Run novaterm
mount -o remount,rw /boot
cd /boot
rm uImage
exit
novaterm put file://boot/uImage < moboot.uImage
novaterm
cd /boot
ln -sf uImage-2.6.35-palm-tenderloin uImage.webOS
Output should look like:
